Price
Price
Name

[BBA000100100] Battery Balancer

The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.If needed, several balancers can be paralleled.A 48V battery bank can be balanced with three Battery Balancers.

136.90 лв. 136.90 лв. 136.9 BGN

136.90 лв.

Product not available

Add to Cart More Info

Battery Balancer

136.90 лв. 136.9 BGN

Quick View

Clamp connector

The clamp connector with fuse is an accessory for the Blue Smart IP65 Chargers.

Model
- Clamp connector (with 30A fuse)
- Clamp connector (with 30A ATO fuse)

9.78 лв. 9.78 лв. 9.78 BGN

9.78 лв.

Product not available

This combination does not exist.

Add to Cart More Info

Clamp connector

9.78 лв. 9.78 BGN

Quick View

Interface MK3-USB

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.

Model
- Interface MK3-USB (VE.Bus to USB)
- Interface MK3-USB-C (VE.Bus to USB-C)
- Interface MK2-USB (for Phoenix Charger only)

162.33 лв. 162.33 лв. 162.32999999999998 BGN

150.60 лв.

Product not available

This combination does not exist.

Add to Cart More Info

Interface MK3-USB

162.33 лв. 162.32999999999998 BGN

Quick View

[ASS030550120] Inverting remote on-off cable

Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output: VE.Bus BMS: the Inverter will be switched off when the batteries are emptyBlueSolar MPPT Charger: connecting an inverter directly on the load output of a BlueSolar MPPT Charger is not possible; the inverter needs to be connected to the battery. Then use this cable to switch the inverter on and off with the load output.

41.07 лв. 41.07 лв. 41.07 BGN

41.07 лв.

Product not available

Add to Cart More Info

Inverting remote on-off cable

41.07 лв. 41.07 BGN

Quick View

Smart Battery Sense

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.

Model
- Smart Batt Sense short range (3m)
- Smart Battery Sense long range (up to 10m)

58.67 лв. 58.67 лв. 58.669999999999995 BGN

58.67 лв.

Product not available

This combination does not exist.

Add to Cart More Info

Smart Battery Sense

58.67 лв. 58.669999999999995 BGN

Quick View

VE.Direct to USB interface

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

Model
- VE.Direct to USB interface
- VE.Direct to USB-C interface
- RS485 to USB interface 5m

60.63 лв. 60.63 лв. 60.629999999999995 BGN

60.63 лв.

Product not available

This combination does not exist.

Add to Cart More Info

VE.Direct to USB interface

60.63 лв. 60.629999999999995 BGN

Battery Balancer

Clamp connector

Interface MK3-USB

Inverting remote on-off cable

Smart Battery Sense

VE.Direct to USB interface

Store Servies

About Store